Brass T Jet 110 04 – Genuine Replacement Jet for Ashbys Premium 2‑Jet Carpet Cleaning Wand & Professional Tools
The Brass T Jet 110 04 is a genuine replacement jet designed for the Ashbys Premium Quality 2‑Jet Carpet Cleaning Wand and a range of compatible professional carpet and upholstery tools. This batch is old stock that has been stored for several years. The jets are brand new and unused, but may show minor surface discolouration from long‑term storage. This does not affect performance, fit or spray pattern in any way.
If your spray pattern has become uneven, weak or inconsistent, worn jets are often the cause. Replacing them restores correct flow, coverage and cleaning performance — assuming your pump and jet filters are in good condition. For filters, see the Jet Filter & Check Valve.
Understanding Jet Orifice Sizes
Jet sizes directly affect flow rate and spray pattern. Here is the relevant comparison:
-
110 015 – approx. 0.015 inch orifice (ideal for 200–800 psi machines)
-
110 03 – approx. 0.030 inch orifice (ideal for 70–190 psi machines)
-
110 04 – approx. 0.040 inch orifice (higher flow than 03, noticeably more than 015)
The 110 04 sits between low‑pressure and high‑pressure jet sizes, giving a slightly higher output than the 03 jet. Professionals select the 04 when they want a little more flow for faster rinsing or wider coverage.
Recommended Pressure Range
The 110 04 jet is suitable for:
-
70–190 psi machines on a 2‑jet wand (for increased flow compared to the 03 jet)
-
Up to 800 psi on a single‑jet wand (excellent flow and coverage)
This makes the 110 04 a versatile choice for cleaners who want a little extra performance without moving to a high‑pressure 015 jet.
Using a higher‑pressure machine?
If your machine operates above 200 psi and you prefer a tighter, more controlled spray pattern, choose the Brass T Jet 110 015 – for 200+ psi machines.
Why replace your jets?
- Restores a clean, even spray pattern
- Improves rinsing and soil removal
- Prevents streaking and patchy results
- Ensures consistent water flow
- Low‑cost upgrade with noticeable performance gains
Many professionals keep spare jets on hand so they can refresh their wand whenever performance drops.
Other compatible spare parts
To complete or rebuild your jet assembly, you may also need:
Benefits Table
| Benefit |
What it means for you |
| Higher flow than 03 jets |
Smoother rinsing and faster wand passes |
| Suitable for 2‑jet and single‑jet tools |
Flexible choice across your kit |
| Accurate 110° spray pattern |
Even coverage with no streaking |
| Genuine Ashbys specification |
Reliable performance and correct fit |
| Old stock, brand new |
Excellent value with full performance |
| Minor discolouration possible |
Purely cosmetic, no effect on operation |
FAQs
Will this jet fit my Ashbys 2‑jet wand?
Yes, it is a direct replacement and fits perfectly.
Is the 110 04 better than the 110 03?
It provides slightly more flow, which some professionals prefer for faster rinsing.
Can I use this jet on a high‑pressure machine?
Yes, up to 800 psi on a single‑jet tool. For 200+ psi on a 2‑jet wand, the 110 015 is usually the better choice.
Does the discolouration affect performance?
No. The jets are brand new and unused. Any discolouration is cosmetic only.
How often should jets be replaced?
Many cleaners replace jets every few months, depending on usage and water quality.
Do I need new filters when replacing jets?
If your spray pattern has been inconsistent, it is worth checking the jet filter. A filter should be replaced if it has become clogged and cannot be fully cleared by cleaning, or if you have a continual drip from the jet that is not caused by the trigger valve letting water by. In these cases, replacing the
Jet Filter & Check Valve is the correct fix.
01795 436999
