Recommended Product
 |
Ashbys Spotter 3 500 ml
A powerful solvent spotter for removing paint, ballpoint ink, permanent inks, oil, grease, nail polish, cosmetics and most adhesives from carpets and upholstery. Fast‑acting and professional‑grade. more info
|
Prochem Solvall Spotter B123 1 Ltr
Prochem Solvall Spotter B123 1 Ltr is a high performance blend of quick drying solvents for removing oil based stains such as grease, tar, oil, bitumen, gum, cosmetics and fresh gloss paint from carpets, fabrics and most surfaces, subject to pre-testing. It is ready-to-use, clear in appearance with a light orange fragrance, and designed for professional and industrial use where controlled solvent spotting is required.
Watch how Solvall Spotter is used professionally to remove tough oil based stains from carpets and fabrics.
Suitable For
- Oil based stains including grease, tar, oil and bitumen
- Gum, cosmetics and fresh gloss paint
- Most solvent-tolerant carpets, fabrics and surfaces (subject to pre-testing)
- Professional corrective spotting where fast solvent action is required
Not Suitable For
- Use without pre-testing in an inconspicuous area
- Dyes, latex and bitumen carpet tile backings that are not stable to solvent
- Spraying or aerosolising the product (strictly prohibited)
- Over-application or rubbing, which can damage fibres
- Use in poorly ventilated areas without proper PPE
Professional Features at a Glance
| Feature |
Professional Benefit |
| Solvent spotter for oil based stains |
Targets grease, tar, oil, bitumen, gum, cosmetics and fresh gloss paint. |
| Quick drying solvent blend |
Minimises residue and speeds up job completion. |
| Ready-to-use |
No dilution required; consistent performance on every job. |
| Clear solvent with light orange fragrance |
Easy to see during application and leaves a light, pleasant scent. |
| Professional and industrial use only |
Formulated for trained operators using correct PPE and ventilation. |
Directions
- For professional and industrial use only.
- Solvall Spotter is ready-to-use.
- Always pre-test carpet, fabric or surface in an inconspicuous area.
- Ensure adequate ventilation, no smoking and keep people and pets away.
- Wear solvent resistant gloves and safety glasses.
- Scrape up any excess staining matter.
- Apply Solvall Spotter directly to the spot and blot immediately with a white towel or tissue.
- Do not over apply. Do not rub. Do not spray or aerosolise.
- For gum and heavy staining, allow solvent to penetrate before scraping or blotting.
- Repeat if necessary, working from outside to centre of large spots.
- Finally, spray and blot the area with a detergent pre-spray such as B108 Fabric Restorer to remove water based soiling or ring marking.
- Brush carpet or fabric to align fibres.
Recommended Applicator
Solvall Spotter is applied directly to the spot and blotted immediately. For grooming after treatment, many professionals use the Ashbys Carpet Pile Brush to realign fibres and restore appearance.
Safety & PPE
- May cause an allergic skin reaction.
- May be fatal if swallowed and enters airways.
- Harmful to aquatic life with long lasting effects.
- Repeated exposure may cause skin dryness or cracking.
- Do not breathe vapours.
- Wear protective gloves such as Disposable Nitrile Gloves – Powder Free.
- For enhanced respiratory protection, use the Ashbys Protective Respirator Half‑Mask.
-
IF SWALLOWED: Immediately call a POISON CENTRE or doctor. Do not induce vomiting.
-
IF IN EYES: Rinse cautiously with water for several minutes and seek medical attention.
Common Mistakes to Avoid
- Spraying or aerosolising Solvall Spotter.
- Skipping pre-testing on sensitive fibres and backings.
- Over-applying solvent instead of using a controlled amount.
- Rubbing the spot, which can distort fibres.
- Working without proper ventilation or PPE.
- Skipping the detergent pre-spray step to remove ring marks.
Before & After Tips
-
Before: Identify the stain type, confirm fibre suitability and pre-test thoroughly.
-
During: Apply Solvall Spotter directly, blot immediately and avoid rubbing.
-
After: Use B108 Fabric Restorer to remove water based residues, then groom fibres.
- Capture before and after photos for client reporting.
Professional Questions & Answers
Q: What stains does Solvall Spotter remove?
Grease, tar, oil, bitumen, gum, cosmetics and fresh gloss paint.
Q: Can I spray Solvall Spotter?
No. The label strictly prohibits spraying or aerosolising.
Q: Does it require dilution?
No. It is ready-to-use.
Q: What should I do after solvent spotting?
Use B108 Fabric Restorer to remove water based residues and groom fibres.
pH values
-
pH: Not applicable (solvent based).
Coverage & dilution
-
Dilution: Ready-to-use; do not dilute.
-
Coverage: Depends on stain size. 1 litre provides multiple applications.
Want to sharpen your results and stand out as a professional?
Our FREE Carpet & Upholstery Cleaning Training Guide covers the proven 6 Stage Method, fabric safety testing and a powerful stain removal section to help you get the best from this product on every job.
01795 436999
